Crane Aerospace & Electronics is seeking an NDT Quality Specialist in Burbank, CA.

Job Summary:

The NDT Quality Specialist sets up and operates nondestructive testing equipment.  Individual must be capable of developing, qualifying, and approving procedures, establishing, and approving techniques, interpreting codes, standards, specifications, and procedures, as well as designating the particular NDT methods, techniques, and procedures to be used.

Primary Responsibilities:

Have general familiarity with magnetic and fluorescent penetrant NDT inspection methods, as demonstrated by an ASNT Level II or III Basic Examination or other means.

Training and examining NDT Level I and II personnel for certification in those methods.

Perform process control tests required for performing NDT inspection methods.

Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection.

Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations.

Apply testing criteria in accordance with applicable specifications or standards and evaluate results.

Organize and report test results.

Interface daily with the leadership team about work priorities and progress of projects

When required assist in conducting component level product evaluation when a failure analysis indicates non-conforming parts, processes, or workmanship as the cause.

Evaluate new equipment for area of responsibility and process supporting Capital Expenditure Request (CER’s).

Any other assignments given by leadership.

Minimum Qualifications:

Experience:

• Non-destructive Testing (NDT) Level II or Level III Certification
• Familiarity with NAS410 (Certification and Qualification of Nondestructive Test Personnel) and ASTM-E-1444-16 (Standard Practice for Magnetic Particle Testing)
• Minimum 4 years inspection experience in an aerospace/automotive (or equivalent) manufacturing environment.
• Ability to set up and perform inspection on standard machined parts, mechanical and/or electronic assemblies per blueprint, manufacturing outline, Crane A&E specifications, and customer requirements. 

Skill & Abilities:

• Strong work ethic
• Mechanical aptitude
• Adaptable to changing schedules
• Exceptional attention to detail
• Ability to follow directions and procedures
• Communication:
• Speaks and writes clearly and informatively; Responds well to questions; Practices active listening; exhibits discretion.
• Quality:
• Exceptional safety and quality awareness; Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; able to approach/evaluate a problem from many angles.
• Adaptability:
• Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events; Able to absorb and process information quickly.
• Interpersonal Skills
• Focuses on solving conflict; Maintains confidentiality; Strong leader; Conducts themselves in a professional manner; Keeps emotions under control; Remains open to others’ ideas and tries new things.
• Teamwork
• Balances team and individual responsibilities; Exhibits objectivity and openness to others’ views; Gives and welcomes honest and open feedback; Contributes to building a positive team spirit; Puts success of team above own interest; Able to build morale and support group commitments to goals and objectives.
• Organizational Support
• Works to fully understand and implement company policies and procedures; Supports organization’s goals and values; Supports a respectful workplace and respects diversity; Provides feedback and strives for continual improvement.
• Planning/Organizing
• Prioritizes and plans work activities; Uses time efficiently; Sets goals and objectives; Develops realistic action plans; actively searches out and implements solutions.
• Attendance/Punctuality
• Is consistently at work and on time; Ensures work responsibilities are covered when absent.
• Dependability
• Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Takes the lead and leads by example.

Education/Certification:

• High School diploma or equivalent
• Some college preferred.
• Must be capable to be certified to NDT Level II Mag-Particle and Penetrant Inspection.
• Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections.

Eligibility Requirement:  This position requires access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). 

Preferred Qualifications:

• Familiarity with AS9100 standards
• Familiar with AS9102 First Article Requirements
• IPC-A-610

Working Conditions:

• Working conditions are normal for a manufacturing environment.
• Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE.
• May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes.
• Involves handling parts in compliance with Electrostatic Discharge Devices (ESD procedures)

             Standing:                       10% *percentage is approximate and may vary depending on work task
             Sitting:                            90% *percentage is approximate and may vary depending on work task
             Lifting (in pounds):          up to 40 pounds
             Pushing (in pounds):      up to 40 pounds
             Mental/Visual:                 use of computer
             Workspace:                     work bench

 

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

We are committed to operational excellence and world class processes.  We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

 Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications.

Quality Specialist Level II:  $28.23 - $35.49

Quality Specialist Level III:  $31.03 to $38.75

Compensation packages also include comprehensive benefits, 401K contribution and match, Paid Time Off, paid holidays, tuition reimbursement and more. Some roles may be eligible for participation in performance-based bonus programs. You can see a list of our benefits at  https://www.craneae.com/company/careers  or visit our website at  www.CraneAE.com   for more information on our company and great opportunities.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check.  FAA sensitive positions require employees to participate in a random drug test pool.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification.  It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity, disability, pregnancy, medical condition, genetic information, protected veteran status or any other characteristic protected under federal, state, or applicable local law.

#LI-MD1